HOME    About this site    mypage    Japanese    library    university    Feedback

University of the Ryukyus Repository >
Faculty of Engineering >
Bulletin >
Bulletin of the Faculty of Engineering, University of the Ryukyus >
No. 39 (1990/03) >

 
Title :変形バイメタルモデルによる拡散不純物表面濃度の決定
Title alternative :Determination of Surface Concentration of Diffused Impurity by the Modified Bimetallic Model.
Authors :前濱, 剛廣
宮里, 博明
宮城, 洋一郎
安冨祖, 忠信
Authors alternative :Maehama, Takehiro
Miyasato, Hiroaki
Miyagi, Yoichiro
Afuso, Chushin
Issue Date :Mar-1990
Abstract :A new method for measuring the surface concentration of the diffused impurity atoms is proposed. Because of the lattice distortion due to the distribution of the diffused impurity atoms, the substrate crystal is warped like bimetals. The equations to calculate the warpage angle of the substrate crystal are derived. The surface concentration of the diffused impurity of the substrate is decided so that the value calculated by the equations fits in the measured value of the warpage angle. The method was actually applied to {l00} GaAs substrates in which Cd atoms had been diffused at 1000℃ and 900℃ respectively. The calculated values of the warpage angle of the substrate assuming the complementary error function for the Cd distribution are in good agreement with the experimental values. The Cd-surface concentrations diffused at 1000℃ and 900℃ were decided as 1.3×10^<19> and 2×10^<18>cm^<-3>, respectively. For the reduction of the warpage angle when the diffused layer was removed, the theoretical values were also in good agreement with the experimental values. From these facts, therefore, the validity of the assumption of the complementary error function for the Cd-distribution were confirmed.
Type Local :紀要論文
ISSN :0389-102X
Publisher :琉球大学工学部
URI :http://hdl.handle.net/20.500.12000/12448
Citation :琉球大学工学部紀要 no.39 p.87 -97
Appears in Collections:No. 39 (1990/03)

Files in This Item:

File Description SizeFormat
No39p87.pdf692KbAdobe PDFView/Open