HOME    About this site    mypage    Japanese    library    university    Feedback

University of the Ryukyus Repository >
Faculty of Engineering >
Bulletin >
Bulletin of the Faculty of Engineering, University of the Ryukyus >
No. 41 (1991/03) >

 
Title :鋳鉄の溶接金属組成を模したFe-0~50%Ni-0~15%Mn合金の二,三の性質
Title alternative :Some Properties of Fe-0~50%Ni-0~15%Mn Alloy Simulated Cast Iron Weld Metal Composition
Authors :糸村, 昌祐
押川, 渡
平敷, 兼貴
東, 新太郎
Authors alternative :Itomura, Shosuke
Oshikawa, Wataru
Heshiki, Kenki
Azuma, Shintaro
Issue Date :Mar-1991
Abstract :This report is continued from the previous work to obtain the optimum welding electrode which has an adequate composition for cast iron welding. Fe - (0-50) % Ni - (0-15) % Mn alloys simulated to the composition of cast iron weld metal were molten and cast into four kinds of molds to examine solidification temperature, tensile strength, shrinkage length and thermal expansion coefficient, as same as previous work. Because of the changing size of copper mold for examining tensile strength, the cooling curves of the tensile test specimens were changed as the similar curve to that of the implant test of cast iron pre-heated to 423K. From the results obtained in the present work, it is concluded that the adequate composition range of the cast iron weld metals is Fe - (36-40) % Ni - (6-8) % Mn. As for 30% penetration rate, these figures turn out Fe - (51-57) % Ni - (8-12) % Mn electrode.
Type Local :紀要論文
ISSN :0389-102X
Publisher :琉球大学工学部
URI :http://hdl.handle.net/20.500.12000/13727
Citation :琉球大学工学部紀要 no.41 p.1 -9
Appears in Collections:No. 41 (1991/03)

Files in This Item:

File Description SizeFormat
No41p001.pdf1089KbAdobe PDFView/Open