HOME    About this site    mypage    Japanese    library    university    Feedback

University of the Ryukyus Repository >
Faculty of Engineering >
Bulletin >
Bulletin of the Faculty of Engineering, University of the Ryukyus >
No. 20 (1980/09) >

Title :有限要素法による不完全合成桁の弾塑性解析
Title alternative :Elastic-Plastic Analysis of Composite Beams with Incomplete Interaction by the Finite Element Method
Authors :有住, 康則
筑瀬, 明弘
浜田, 純夫
梶田, 建夫
Authors alternative :Arizumi, Yasunori
Chikuse, Akihiro
Hamada, Sumio
Kajita, Tateo
Issue Date :Sep-1980
Abstract :Recently the load factor method has been taking the place of the allowable stress method for composite members in the United States and European countries. It is the most important in the load factor design method to assure the mechanical behavior such as ultimate capacity of the structure. Ultimate strength is based on the properties of steel, concrete and shear connectors. In the present study some discussions on ultimate states are provided for composite beams with incomplete interaction applying elastic-plastic analysis. Some studies on the elastic analysis for incomplete composite beams have been presented in the bulletin by authors, and this is developed to inelastic analysis based on bilinear elasto-plastic properties of concrete, steel and shear connectors by means of the finite element method. An iterative initial strain method is employed in the present analytical procedure, where inelastic strains and deformations of materials are evaluated to the equivalent loads. This is also applied to analysis of cracked reinforced concrete beams. The main results of the analysis are as follows; (1) There is not much difference in the mechanical behavior of composite beams with shear connectors between spaced equally and spaced proportinally to horizontal shear. (2) Composite beams with partial interaction have an advantage of stress reduction on longitudinal reinforcing bars in negative moment regions, where it may be near the point of counterflection. This tendency becomes more apparent along with extent of the plastic range.
Type Local :紀要論文
ISSN :0389-102X
Publisher :琉球大学工学部
URI :http://hdl.handle.net/20.500.12000/14690
Citation :琉球大学工学部 no.20 p.69 -88
Appears in Collections:No. 20 (1980/09)

Files in This Item:

File Description SizeFormat
No20p069.pdf1155KbAdobe PDFView/Open