University of the Ryukyus Repository >
Faculty of Engineering >
Bulletin of the Faculty of Engineering, University of the Ryukyus >
No. 38 (1989/09) >
|Title alternative ||:||The Characteristics of Repetitional Simple Shear of Dry Sand undre Given Uniform Load and Non-Uniform Load|
|Authors ||:||許, 光瑞|
|Authors alternative ||:||Kyo, Kozui|
|Issue Date ||:||Sep-1989 |
|Abstract ||:||The authors have reported formerly some results of the repetitional simple shear test in the range of large shearing strain γ_a > 1%. It was conducted under some given strains. Herein. some experimental results conducted under given uniform load and non-uniform load are shown.
The experiment was conducted in three kind of relative densities (Loose state:D_r = 60%, Dense state: D_r = 80%). and the air dry TOYOURA uniform sand was used. The shearing test are consist of three cases. such as : 1) Single direction shearing, 2) Repelitional shearing under the uniform load, 3) Repetitional shearing under the non-uniform load. The load are in the range of 50 ～ 90 % of the maximum shear stress.
The following results are obtained : 1) The shearing strength after repetitional test was affected by the change of density during test, and also affected by the confining pressures. 2) Internal friction angle φ is determined by the void ratio e and the interparticle friction angle φ_μ. 3) the relationship between equivalent hysteretic damping h and shearing modulus G are approximately linear. The relationships have respect to the interparticle friction angle of sand.|
|Type Local ||:||紀要論文|
|Citation ||:||琉球大学工学部紀要 no.38 p.1 -9|
|Appears in Collections||:||No. 38 (1989/09)|
Files in This Item: