HOME    About this site    mypage    Japanese    library    university    Feedback

University of the Ryukyus Repository >
Faculty of Engineering >
Bulletin >
Bulletin of the Faculty of Engineering, University of the Ryukyus >
No. 34 (1987/10) >

Title :乾燥砂の繰り返し単純セン断特性に関する実験的研究
Title alternative :An Experimental study on the Characteristics of Repetitional Simple Shear of Dry Sand
Authors :許, 光瑞
加藤, 進
大城, 林
Authors alternative :Kyo, Kozui
Kato, Susumu
Oshiro, Hayashi
Issue Date :Oct-1987
Abstract :The characteristics of repetitional simple shear test of soils are studied mostly in the case of dynamic soil test, and hardly in the case of static soil test. While in practical case, sometimes it is necessary to obtain some soil data using the general type (static type) of simple shear test apparatus. The authors, in view of the latter case, conducted experimentally on the repetitional simple shear test in the range of large shearing strain γ=1~5% using the general type of simple shear test apparatus. The experiment was conducted in three kind of relative densities (Loose state: D_r=40%, Medium state: D_r=60%, Dense state: D_r=80%), and air dry TOYOURA uniform sand was used. Two cases of shearing test were conducted, such as : 1) Singular direction shearing (Usual test), 2) Repetitional shearing under constant cycles. The following results are obtained : 1) The interparticle friction angle of sand φ_μ is obtained in the range of φ_μ = 18.5~25.4 (°). The smaller value was obtained in the cases of increasing the normal stress applied in simple shear test σ_v, or decreasing the relative density D_r. 2) The equivalent hysteretic damping factor h is shown the range of h=20~29 (%), the value h increases at larger repetitional shear strain γ_a, or at smaller normal stress applied in simple shear test σ_v. 3) The relationship between equivalent hysteretic damping h and shearing modulus G are approximately linear at nearly 10 cycles. 4) It could be considered that the change of the repetitional shearing characteristics are influenced not only by the change of rearrangement of particles due to loading but aslo by the change of interparticle friction angle φ_μ owing to particle crushing.
Type Local :紀要論文
ISSN :0389-102X
Publisher :琉球大学工学部
URI :http://hdl.handle.net/20.500.12000/1987
Citation :琉球大学工学部紀要 no.34 p.197 -207
Appears in Collections:No. 34 (1987/10)

Files in This Item:

File Description SizeFormat
No34p197.pdf744KbAdobe PDFView/Open