HOME    About this site    mypage    Japanese    library    university    Feedback

University of the Ryukyus Repository >
Faculty of Engineering >
Bulletin >
Bulletin of the Faculty of Engineering, University of the Ryukyus >
No. 27 (1984/03) >

 
Title :鋼の被研削性に及ぼす熱処理の影響
Title alternative :Influence of Heat Treating Conditions on the Grindability of Steel
Authors :福本, 功
糸村, 昌祐
平敷, 兼貴
長谷川, 嘉雄
Authors alternative :Fukumoto, Isao
Itomura, Shosuke
Heshiki, Kenki
Hasegawa, Yoshio
Issue Date :Mar-1984
Abstract :Various investigation were carried out to clear the grindability of various structures formed by transformation of the austenite phase in steel and the following results were obtained: (1) The grinding forces and roughness of the ground surface were independent of the hardness of workpieces but dependent on the structure. (2) The grinding forces and roughness of the ground surface show the maximum value in the globular pearlite structure and the minimum value in the lower bainite structure. (3) The depth of the ground surface layer reaches the maximum value in the martensite structure and the minimum value in the lower bainite structure.
Type Local :紀要論文
ISSN :0389-102X
Publisher :琉球大学工学部
URI :http://hdl.handle.net/20.500.12000/1994
Citation :琉球大学工学部紀要 no.27 p.11 -19
Appears in Collections:No. 27 (1984/03)

Files in This Item:

File Description SizeFormat
No27p11.pdf550KbAdobe PDFView/Open