HOME    About this site    mypage    Japanese    library    university    Feedback

University of the Ryukyus Repository >
Faculty of Engineering >
Bulletin >
The Bulletin of Science and Engineering Division University of the Ryukyus >
No.10 (1975/09) >

 
Title :面取り状工具によるせん断加工に関する研究
Title alternative :Study on the Shearing by Use of Chamfering Tool
Authors :銘苅, 春栄
Authors alternative :Mekaru, Shunei
Issue Date :1-Sep-1975
Abstract :The shearing resistance. backing of the sheared product. fraction of the sheared face and the dimensional error were investigated by varying the chamfering profile and clearance, The following are concluded. 1) The shearing resistance is dependent rermarkably on the shape of the edge tip and the clearance. When the punch flank is chamfered largely for certain clearance, the shearing resistance is increased a little. 2) Also the backing of the blanked product is dependent on the shape of the edge tip and the clearance. When the edge tip is chamfered, the magnitude of the backing is increased. 3) The fraction of the sheared area of the cut cross section is hardly influenced by the shape of the edge tip. 4) The dimensional error of the blanked product varies with the plate thickness of the work. When the work is thin, the effect of the edge tip shape becomes remarkable. When the work is thick, the effect is reduced.
Type Local :紀要論文
ISSN :0387-429X
Publisher :琉球大学理工学部
URI :http://hdl.handle.net/20.500.12000/26607
Citation :琉球大学理工学部紀要. 工学篇 = Bulletin of Science & Engineering Division, University of the Ryukyus. Engineering no.10 p.81 -89
Appears in Collections:No.10 (1975/09)

Files in This Item:

File Description SizeFormat
No10P081.pdf2601KbAdobe PDFView/Open