HOME    About this site    mypage    Japanese    library    university    Feedback

University of the Ryukyus Repository >
Faculty of Engineering >
Bulletin >
The Bulletin of Science and Engineering Division University of the Ryukyus >
No.11 (1976/03) >

 
Title :沖縄の鉄骨構造建築物とその溶接について -溶接の問題点と考察その1-
Title alternative :Buildings of Steel Structure and Their Welding in Okinawa
Authors :真喜志, 康二
平敷, 兼貴
屋良, 秀夫
Authors alternative :Makishi, Yasuji
Heshiki, Kenki
Yara, Hideo
Issue Date :1-Mar-1976
Abstract :In the beginning of steel structure buildings, riveted joint was a normal method, but by the development of high thickness and high strength of the steel, the joint method with high tension bolt had becoming used. Recently, the joint methods with both of high tension bolt and welded joint have been taken. The followings are found to be apparent. 1. Each fabricator's welders, who have welder's license, have much experience. 2. Because each fabricator has very few welding engineers, the instruction for the welding technique is not enough. For example, the control of steel material and welding rods, groove form of joint and the strain of welded products. 3. The inspection of welded parts is dealt by each fabricator. In fact only 10 percents of the parts are inspected. 4. The welding defect, especially undercut, is found in the parts of the welded joint between pillar and beam.
Type Local :紀要論文
ISSN :0387-429X
Publisher :琉球大学理工学部
URI :http://hdl.handle.net/20.500.12000/26614
Citation :琉球大学理工学部紀要. 工学篇 = Bulletin of Science & Engineering Division, University of the Ryukyus. Engineering no.11 p.9 -20
Appears in Collections:No.11 (1976/03)

Files in This Item:

File Description SizeFormat
N11P009.pdf3986KbAdobe PDFView/Open