HOME    About this site    mypage    Japanese    library    university    Feedback

University of the Ryukyus Repository >
Faculty of Engineering >
Bulletin >
The Bulletin of Science and Engineering Division University of the Ryukyus >
No.13 (1977/03) >

Title :平行直線刃による両面せん断加工の研究 (細長比の大きいポンチによる両面せん断)
Title alternative :Study on Shearing by Parallel and Straight Cutting Edges (Double-side Shearing by Using Punches with High Slenderness Ratio)
Authors :銘苅, 春栄
Authors alternative :Mekaru, Shunei
Issue Date :28-Mar-1977
Abstract :The life of shearing tool is usually determined by the degree of steady wear which increases as the number of operations increases. Especially in case of the punches with high slenderness ratio, the bending or breakage of the punches shortens the service life, and this fact hinders smooth operation. The fundamental research presented here was carried out to make clear the causes of bending and breakage of the slender punches in order to prolong the tool life. In this paper the author will report and discuss about the theoretical analyses and experiments concerning the several kinds of punch bending caused by the unbalance between shearing force and side force on both sides of the double shearing punch.
Type Local :紀要論文
ISSN :0387-429X
Publisher :琉球大学理工学部
URI :http://hdl.handle.net/20.500.12000/26794
Citation :琉球大学理工学部紀要. 工学篇 = Bulletin of Science & Engineering Division, University of the Ryukyus. Engineering no.13 p.11 -24
Appears in Collections:No.13 (1977/03)

Files in This Item:

File Description SizeFormat
No13P011.pdf4755KbAdobe PDFView/Open