HOME    About this site    mypage    Japanese    library    university    Feedback

University of the Ryukyus Repository >
Faculty of Engineering >
Peer-reviewed Journal Articles (Faculty of Engineering) >

Title :バガス繊維で強化された射出成形体の機械的性質の評価
Title alternative :Evaluation of Mechanical Properties of Injection Molding Product Reinforced by Bagasse Fiber
Authors :曹, 勇
福本, 功
Authors alternative :Cao, Yong
Fukumoto, Isao
Issue Date :25-Mar-2005
Abstract :BMC (Bulk Molding Compound) is composed of glass fiber. UP (unsaturated polyester) resin and filler. Bagasse is the waste obtained after squeezing sugar cane. Our purpose is use bagasse fiber as a reinforcement and filler of BMC, and fabricate product by injection molding and injection compression molding. The mechanical properties of product were improved after adding bagasse fiber. Viewing the fracture surface on tensile test specimen through SEM, we could observe the glass fibers were penetrated into the bagasse fibers longitudinally. Along with the UP resin solidifying, the glass fibers were firmly fixed into the bagasse fibers and finally united weth them. This effect indicated the glass fiber length was prolonged so that the adhesion interface with UP resin became larger, and leaded to increase the mechanical properties. Otherwise, it was observed the UP resin was sufficiently permeated through the bagasse fibers and solidified. These phenomena also contributed to enhance the mechanical properties drastically.
Type Local :雑誌掲載論文
ISSN :0387-5024
Publisher :日本機械学会
URI :http://hdl.handle.net/20.500.12000/367
Citation :日本機械学会論文集. C編 = Transactions of the Japan Society of Mechanical Engineers. C Vol.71 no.703 p.307 -312
Appears in Collections:Peer-reviewed Journal Articles (Faculty of Engineering)

Files in This Item:

File Description SizeFormat
fukumoto_i05.pdf660KbAdobe PDFView/Open