HOME    About this site    mypage    Japanese    library    university    Feedback

University of the Ryukyus Repository >
Faculty of Engineering >
Peer-reviewed Journal Articles (Faculty of Engineering) >

 
Title :バガス繊維による複合材料の射出成形体の曲げ弾性率について
Title alternative :Flexural Modulus of Injection Molding Composites Made from Bagasse Fiber and Polypropylene
Authors :柴田, 信一
曹, 勇
福本, 功
Authors alternative :Shibata, Shin-ichi
Cao, Yong
Fukumoto, Isao
Issue Date :25-Jul-2005
Abstract :Flexural modulus of injection molding composites made from bagasse fiber and polypropylene was investigated. The results were validated with the numerical calculation based on Cox's model. Flexural modulus increased with increasing the volume fraction of bagasse fiber and the prediction by the calculation was in good agreement with the experiment. However, the flexural modulus of the composites without kneading, which is the process of making the pellets from bagasse fiber and polypropylene, was lower than that with kneading. Without kneading. the sizes of bagasse fibers in the composite were larger than that without kneading. These bagnsse fibers resulted in a heterogeneous distribution in the composite and bagasse fibers failed to be bridging fibers which transfers load each other. Furthermore, at mold temperature 30℃, the flow marks with white turbidity occurred on the surface. In the observation of the flow mark, there were lots of the fibers. which were not bonded with polypropylene. This was another factor to decrease the flexural modulus.
Type Local :雑誌掲載論文
ISSN :0387-5024
Publisher :日本機械学会
URI :http://hdl.handle.net/20.500.12000/370
Citation :日本機械学会論文集. C編 = Transactions of the Japan Society of Mechanical Engineers. C Vol.71 no.707 p.318 -323
Appears in Collections:Peer-reviewed Journal Articles (Faculty of Engineering)

Files in This Item:

File Description SizeFormat
fukumoto_i02.pdf627KbAdobe PDFView/Open